HOW to Install EasyWallz

Before Installing

• Inspect your wall for any defects
• Remove all picture hooks, light fixtures and any elements that could damage your Peel and Stick Wall Mural during the installation process
• Wash off any dirt, dust and residue from old wallpaper. Rinse with warm water and let dry. A clean wall will help the adhesive from your Wall Mural to keep its stickiness if repositioning is required

IMPORTANT!

DO NOT pre-trim your Peel and Stick Wall Mural!

As straight as it seems, your wall or ceiling could be slightly off.

Peel and Stick!

Gently peel off the first panel of your Wall Mural and stick the first corner of it to the top

left corner of your wall, the easiest place to start. If you purchased a Peel and Stick

Wall Mural that is smaller than your actual size wall, simply start by making a

guideline, just like you would do to hang a regular poster or a picture frame

Slowly peel off the rest of the wallpaper and stick it gradually to the wall by

gently pushing it with your hand, a plastic/rubber smoothing tool or a smoothing brush,

to avoid wrinkles

Once the first panel is applied, and if necessary, remove any bubbles by gently

pushing them outward with your smoothing tool

Additional Panels

Start by aligning the second panel to the first one. Simply stick the second panel against

the edge of the first one.

Repeat steps above for each additional panel

Trim the overage (optional)

Once all panels have been applied, slowly trim all the overage by using an utility knife

with a sharp blade. Follow the edges of your wall to do so

Repositioning

In case you need to reposition your Wall Mural, GENTLY and SLOWLY remove each

panel by starting with the last one. To avoid any damage to your wall while removing,

keep the Wall Mural as flat and parallel to the wall as possible. Use your hand to

gradually hold back the Wall Mural during this process.